Zhejiang Kangyu Automobile Parts Co., Ltd. is one of the leading manufacturers and suppliers of cadillac ct5 floor mats in China. We are committed to providing high quality auto parts with CE, ISO, IATF16949 certification. Welcome to wholesale bulk durable cadillac ct5 floor mats from our factory. Contact us for more about customized service and 6 years warranty.
Introduction: One Fitment Program for the Entire CT5 Range
For distributors and marketplace sellers, the sedan range creates a catalog problem: the standard model and the performance models sell side by side, and each needs a correctly fitted mat. Our Cadillac CT5 floor mats solve it with a single, vehicle-specific TPE program. It covers the CT5, CT5-V and CT5-V Blackwing for model years 2020–2026, in left-hand-drive and right-hand-drive configurations, all in stock.
Each set is a 3-piece configuration: driver, passenger and a one-piece rear liner with full coverage including the center hump. The liners are molded from 100% TPE (thermoplastic elastomer) on tooling developed from 3D-scanned vehicle data. They are odor-free, waterproof, slip-resistant and fully recyclable. Zhejiang Kangyu Automobile Parts Co., Ltd. is a source factory, so you buy directly from the manufacturer with no intermediary margin.
Key Advantages
Fewer SKUs to Manage
Because one fitment family covers CT5, CT5-V and CT5-V Blackwing across 2020–2026, you carry one part number family instead of splitting stock by trim. LHD and RHD are both available from stock, which supports multi-market distribution from a single supplier.
Male-Mold Vacuum Forming for Sharp Surface Detail
Our core process is male-mold (convex) vacuum forming. The TPE sheet is heated, drawn onto the mold and trimmed, so the visible surface takes the mold's exact geometry. The result is crisp edge definition and a clean tread pattern on the A-surface. We also offer female-mold vacuum forming for cost-controlled programs and injection molding, which gives the sharpest detail on both faces. Process selection is covered in the FAQ below.


Fitment Validated Beyond the Scan
Our engineers scan multiple production batches of the same vehicle and work from the median value, because the same model can vary between build dates. Shrinkage ratio and installation clearance are factored into the pattern. Every new pattern then goes through repeated real-vehicle trial fitting, which confirms pedal clearance and retention-clip compatibility before mass production.
Factory-Controlled Materials
Sheet is produced in-house from our own TPE formulation. Only new, unused TPE is used, and offcuts from trimming are recycled in our production loop. Raw material, sheet production, forming, assembly and custom packaging are all handled in our own facility, so quality control starts at the pellet.
Stable in Heat and Cold
The TPE construction is designed to resist deformation and color fading under sun exposure, and to stay flexible rather than turning brittle in low temperatures. This suits a premium sedan that is driven year-round.
Private-Label Ready
OEM/ODM support includes logo embossing, custom colors, custom packaging and white-label supply. Logo customization is the most requested option among our North American and European buyers.

Application Scenarios
Automotive aftermarket distributors and wholesalers
a consolidated CT5 line for regional stocking programs.
Amazon, eBay and independent e-commerce sellers
vehicle-specific listings with private-label packaging.
Dealership and accessory programs
protective liners for new and pre-owned premium sedans.
Import and trading companies
container-based replenishment of LHD and RHD fitments.
Tuning and performance shops
floor protection matched to the performance-oriented CT5-V and CT5-V Blackwing.
Fleet and rental operators
easy-to-clean, waterproof floor coverage for high-turnover vehicles.
Technical Specifications
|
Parameter |
Detail |
|
Product |
Vehicle-specific TPE floor liners (all-weather floor mats) |
|
Fitment |
Cadillac CT5, CT5-V, CT5-V Blackwing |
|
Model years |
2020–2026 |
|
Steering configuration |
LHD and RHD, both in stock |
|
Set configuration |
3 pieces: driver + passenger + one-piece rear |
|
Rear coverage |
Full coverage, including center hump |
|
Material |
100% new TPE (environmentally friendly, recyclable) |
|
TPE thickness |
Approx. 2.7–3.3 mm |
|
Approx. weight per set |
3–5 kg (for freight estimation) |
|
Standard color |
Black |
|
Custom colors |
Bulk custom color-matching with color card |
|
Optional upgrade |
Two-layer carpet-top construction |
|
Forming processes |
Male-mold vacuum forming (core), female-mold vacuum forming, injection molding |
|
Tooling |
Developed from 3D-scanned vehicle data; aluminum alloy molds |
|
Customization |
OEM/ODM, logo embossing, custom packaging (carton or wooden pallet, logo-printable) |
|
MOQ |
10 sets |
|
Lead time |
In-stock: 3–5 days; custom color: 7–10 days; new mold: approx. 40 days |
|
Warranty |
6 years |
|
Trade terms |
FOB, CIF, EXW, DDP, DDU |
|
Payment |
T/T |
|
Certifications |
IATF 16949, ISO 9001, ISO 45001, ISO 14001, SGS, RoHS |
Why Choose Kangyu
Quality system
IATF 16949 plus ISO 9001, ISO 45001 and ISO 14001. SGS and RoHS test reports are available on request.
Scale
a 30,000 m² production base, a 15-person R&D team, and an 800+ vehicle mold library. Annual capacity is 2,000,000 sets, with daily output of approximately 3,000 sets.
Automation
fully automatic injection lines and automatic and semi-automatic vacuum forming lines, supported by an ERP system covering finance, materials, warehouse and orders.
Logistics
the facility is approximately 108 km (about 1.5 hours) from the nearest port and about 5 km from the nearest airport.
Proven export record
we supply importers and e-commerce companies in the United States, Europe, Australia and Southeast Asia. Repeat buyers include importers who ordered across dozens of vehicle models.
Export documentation
certificate of origin, inspection report, commercial invoice and packing list.

ISO9001

ISO14001

ISO45001

RoHS

SGS

RoHS
About the Manufacturer

Zhejiang Kangyu Automobile Parts Co., Ltd. was founded in 2022 and specializes in vehicle-specific TPE floor mats. We run a direct-factory model, covering design, tooling, forming, quality inspection and packaging under one roof. Our guiding principle is "High Quality, Competitive Price, Strong Reputation, Excellent Service." In practice that means in-house TPE sheet formulation, a 6-year warranty and 7×24 customer response. Factory audits are welcome by appointment, with audit costs borne by the customer.
FAQ
Q: Which Cadillac CT5 floor mats are in stock, and do they fit the CT5-V?
A: The CT5, CT5-V and CT5-V Blackwing are covered for model years 2020–2026, with LHD and RHD both in stock. See the Technical Specifications table for the set configuration.
Q: How do I choose between male-mold, female-mold and injection-molded CT5 liners?
A: Male-mold vacuum forming is our recommended core process for premium programs and large-volume orders. Injection molding suits high-end positioning because it gives the sharpest detail on both faces. Female-mold forming is the cost-control option. Tell us your target market and price level, and we will recommend a process.
Q: How should the liners be installed and cleaned?
A: Place the liners flat in the footwell with the driver piece seated against the pedal area, and secure them using the vehicle's retention points. For cleaning, remove the liners and rinse with water. TPE is waterproof and easy to wipe clean.
Q: What is your MOQ and lead time for CT5 orders?
A: The MOQ is 10 sets. In-stock fitments ship in 3–5 days, and custom colors take 7–10 days. The full lead-time breakdown is in the Technical Specifications table.
Q: Can I order private-label packaging, logo embossing or custom colors?
A: Yes. We support OEM/ODM, logo embossing, white-label supply, custom packaging and bulk color-matching. For accurate color results, we recommend you send a physical sample for matching.
Q: Do you offer samples and factory audits, and what warranty applies?
A: Sample fees equal the finished-product price and are fully refunded after you place an order. Factory audits are available by appointment, at the customer's expense. The warranty period is listed in the Technical Specifications table, and our team responds 7×24.
Request a Quote for Cadillac CT5 Floor Mats

Planning a CT5 or CT5-V program for your market? Tell us your quantity, steering configuration, color and packaging requirements through our inquiry form, and we will return a detailed quotation with lead time and trade terms.
Hot Tags: cadillac ct5 floor mats, China cadillac ct5 floor mats manufacturers, suppliers, factory


