Zhejiang Kangyu Automobile Parts Co., Ltd. is one of the leading manufacturers and suppliers of nissan pathfinder floor liners in China. We are committed to providing high quality auto parts with CE, ISO, IATF16949 certification. Welcome to wholesale bulk durable nissan pathfinder floor liners from our factory. Contact us for more about customized service and 6 years warranty.
Nissan Pathfinder Floor Liners (2022–2025) | 4-Piece 3-Row TPE Set | Factory Direct
Zhejiang Kangyu Automobile Parts Co., Ltd. manufactures vehicle-specific TPE floor protection at source. Our Nissan Pathfinder floor liners are engineered for the 2022–2025 seven-seat Pathfinder and cover all three rows with a four-piece set: driver, front passenger, one second-row piece and one third-row piece.
Three-row SUVs put heavy demands on floor protection. Wet boots, child seats, sand and winter slush reach every row, and a poor-fitting liner shifts, curls or leaves exposed carpet. Each liner is molded from 3D-scanned vehicle data, so the set follows the Pathfinder's floor geometry row by row. For importers, distributors and marketplace sellers, this means fewer fitment complaints and a SKU that is in stock now rather than a tooling project.
Key Advantages
Source-factory supply, in stock for 2022–2025
Existing tooling and available stock cover every 2022–2025 trim, in both left-hand-drive and right-hand-drive versions. You avoid mold fees and the 40-day tooling window.
Male-mold vacuum forming as the core process
The TPE sheet makes direct contact with the mold surface, so the A-side reproduces the mold in full. Edges and surface texture come out crisp. We also run female-mold vacuum forming and injection molding, and can advise which suits your channel: male-mold for premium and volume programs, female-mold where cost control matters, injection where maximum edge definition is wanted.


Complete three-row configuration
The four-piece layout matches the Pathfinder's captain's-chair second row with a single second-row piece and a dedicated third-row piece. Buyers get one SKU that protects the whole cabin instead of assembling partial sets.
Environmentally friendly TPE, odor-free
New (virgin) TPE material is used, and the sheet is produced in-house with our own formulation. This matters for family-focused buyers and for markets with strict material expectations. See the Specifications table for compliance documents.
Private-label and bulk customization
Logo customization, custom packaging and bulk color matching are available. Standard color is black. Custom colors are matched against a supplied color card, which keeps color variance down in bulk orders.
Documented quality control
We operate IATF 16949, ISO 9001, ISO 14001 and ISO 45001 management systems and hold SGS and RoHS test reports. Dedicated QC staff inspect at incoming, in-process and outgoing stages.

Application Scenarios
Wholesale and distribution
a stocked, three-row SKU for retail accounts that serve Pathfinder owners.
01
Online marketplaces and independent brands
one well-matched four-piece set per listing reduces returns caused by wrong fitment. Private labeling and neutral packaging are supported.
02
Dealerships and accessory programs
a ready-to-ship protection package for new and used 2022–2025 Pathfinders.
03
Family and fleet use
seven-seat vehicles used for school runs, airport transfers and rental duty, where second- and third-row floors take constant wear.
04
All-season markets
wet, muddy, sandy and snowy conditions where waterproof, easy-to-clean Pathfinder all-weather liners are expected.
05
Technical Specifications
|
Item |
Details |
|
Product |
Nissan Pathfinder floor liners, vehicle-specific |
|
Fitment |
Nissan Pathfinder, 2022–2025, all trims, 7-seat |
|
Steering configuration |
LHD and RHD, both in stock |
|
Set configuration |
4 pieces: driver, front passenger, 1 second-row (captain's chairs), 1 third-row |
|
Material |
Environmentally friendly TPE (virgin material) |
|
Main forming process |
Male-mold vacuum forming (female-mold vacuum forming and injection molding also available) |
|
Construction |
Single-layer TPE standard; two-layer carpet-top upgrade available |
|
TPE thickness |
2.7–3.3 mm |
|
Approx. weight per set |
3–5 kg |
|
Standard color |
Black; bulk custom colors via color card |
|
Customization |
Logo, private label, custom packaging (carton or wooden pallet) |
|
MOQ |
10 sets |
|
Lead time |
In stock: 3–5 days; custom color: 7–10 days; new mold: about 40 days |
|
Warranty |
6 years |
|
Support |
7×24 customer response |
|
Certifications |
IATF 16949, ISO 9001, ISO 14001, ISO 45001; SGS and RoHS test reports |
|
Trade terms |
FOB, CIF, EXW, DDP, DDU |
|
Payment |
T/T |
|
Export documents |
Certificate of origin, quality inspection report, commercial invoice, packing list |
Why Choose Kangyu
Source factory, not a trading layer. Kangyu was established in 2022 and operates from a 30,000 m² production base, with annual capacity of about 2,000,000 sets and a library of 800+ vehicle molds. Our workforce of 100+ includes a 15-person R&D team and 6 dedicated quality-control staff.
Controlled supply chain. Our chain runs from raw pellets to sheet extrusion, forming, trimming, assembly, inspection and custom packaging, all in-house.
Accurate fitment engineering. New models start from 3D scanning of the original vehicle. Because production tolerances vary between batches of the same model, our engineers scan multiple units and use a median value. They also account for material shrinkage, then confirm the result with repeated test fitting on real vehicles.
Logistics position. Our facility is about 108 km (roughly 1.5 hours) from the nearest port and about 5 km from the nearest airport. Stock programs for Tesla and Toyota models are held continuously.
Verified by buyers. Our customers include cross-border e-commerce sellers and distributors in the US, Europe, Australia, Southeast Asia and the Middle East, many of them repeat buyers.

ISO9001

ISO14001

ISO45001

RoHS

SGS

RoHS
FAQ
Q: Which Pathfinder model years and trims do these liners fit?
A: They fit all trims of the 2022–2025 seven-seat Nissan Pathfinder, in both LHD and RHD; see the Specifications table.
Q: What is included in one set, and does it suit captain's-chair second-row seating?
A: Each set contains four pieces (driver, front passenger, one second-row piece and one third-row piece), made for the captain's-chair layout; see Specifications.
Q: How do I choose between male-mold, female-mold and injection-molded liners?
A: Male-mold vacuum forming is our core process for crisp edges and clear texture, and it is the one we recommend for both premium and volume orders. Female-mold is the option for tighter cost targets, and injection molding delivers the sharpest definition on both faces. Our team can recommend one for your channel.
Q: How are the liners installed, and how should they be cleaned?
A: They are cut to the vehicle's floor shape, so they are laid in place in each row. Remove loose debris, then wash with water and mild detergent, and let them dry before reinstalling. Our team can supply installation guidance for your end customers on request.
Q: What are the MOQ and lead time for the Nissan Pathfinder?
A: MOQ is 10 sets and the model is in stock, so lead time is shorter than for a new mold; see Specifications for the full schedule.
Q: Can we get samples and private-label packaging?
A: Yes. Sample cost equals the standard product price and is refunded in full once you place an order. Logo, private label and custom carton or pallet packaging are available.
Q: What warranty and after-sales support do you provide?
A: A 6-year warranty and 7×24 response apply, as shown in the Specifications table.
Request a Quote

Planning a Pathfinder program for your market? Send us your target quantities, steering configuration, color and packaging requirements through our inquiry form, and our sales team will reply with pricing, lead time and sample arrangements for your Nissan Pathfinder floor liners order.
Hot Tags: nissan pathfinder floor liners, China nissan pathfinder floor liners manufacturers, suppliers, factory


